PURE is a revolutionary Helium Recovery System that converts waste gas from any type of leak detection machine and purifies it to a concentration of up to 97%, without the need to add pure Helium

27 years in the market

VES has been in the industrial leak detection market for 27 years as both manufacturers of Helium machines and recovery systems. During this time, we have realized how difficult it is to maintain a high helium concentration without sacrificing the savings that a recovery system must offer to return a positive ROI.

That’s why we designed the PURE system.

How does the pure system work?

step 1

PURE receives the gas from the detection machines and temporarily stores it in a reserve.

Step 2

The gas passes through the purification system that physically separates the helium particles from all others, thereby achieving a concentration of 97%.

step 3

The pure Helium is stored in a new reserve and the filtered gas is expelled to the outside.

step 4

Helium is compressed and stored in a final reserve at the desired operating pressures.

step 5

PURE adds pure helium to the final reserve only to make up for gas not recovered from the product.

Step 6

When the system reaches the desired concentration and pressure, it is ready to supply the gas back.

Why choose pure?


PURE is an autonomous helium recovery system that does not need to communicate with your machines and can work with any brand of equipment.

High concentration

Our technology allows PURE to accept a helium mix as low as 50% and return it at> 90% concentration without adding pure helium.


PURE tolerates changes in production without sacrificing performance, testing different products at different pressures and concentrations, even tolerates air leaks in the pipe!


The built-in helium concentration meter dynamically reads the helium concentration at different points giving you complete traceability of the helium concentration used in leak testing.


PURE maintains stable concentration levels regardless of variations in production without adding pure helium, which is one of the main problems of traditional recuperators.


PURE is plug-and-play. You only need electrical, pneumatic connection, gas inlet and outlet pipe and that’s it. It does not require complex configuration or adjustments.

Schedule a free consultation

Next steps

The Biggest Problem Facing Helium Leak Testing Today

With helium costs rising year on year, and costs set to continue rising, it can be difficult to complete leak tests to a high standard while on budget.

Test gasses can only be diluted so far before the integrity of the test is compromised, and having to buy more helium for every test only pushes the helium shortage further and prices higher.

Now more than ever, reusing helium is of paramount importance.

The 5 factors that make you lose money in the recovery of helium

case study

line of sniffers for compressors

Four XL3000 Sniffers test 288 compressors per hour at a pressure of 8 barA. Helium is injected into the compressor over atmospheric pressure, therefore, within the compressor there is a concentration of 87% during the test.

It is not possible to evacuate the atmospheric pressure in the product since it would extend the cycle time, therefore, connecting the sniffers to a traditional recuperator is not feasible due to the large amount of pure helium necessary to increase the concentration from 87% to 97%. The average monthly spend on helium without recuperator is $ 30,000 USD.

After implementing PURE, we purify the gas coming from the sniffers to a concentration of 97% and it is sent back to the sniffers at a pressure of 8barA, lowering the average monthly cost in helium to $ 4,500 USD.

Return of Investment of the case study

Investment was recovered in:


  • Savings of 85% were obtained.

  • The equipment was installed and validated in 2 days.

  • Personnel were trained in operation and maintenance routines.

  • Start saving helium instantly and increase your profitability!

We work with leading companies

They have already verified our quality and innovation

Do you have a project on the doorstep? Let’s talk

Whether you want to know more about PURE Helium recovery system or you already have a specific need in leak detection. Write to us and we will contact you in less than 24 hours.

«We are created the PURE system because we wanted our customers to get the most from their helium, especially now costs have risen, regardless of what testing machines they use.”

luke sansby

VES Global Sales Director

By sending you accept the receipt of emails from VES Global

Frequent questions